 |
|
 |
|
New car washer removes foreign materials and dirts on the car surface with high pressure steam (5~6bar) by using
small amount of water (350~550cc). |
|
Proper temperature of steam(approx.80~85 C) wouldn't be harmful to car surface. Other car washer has higher
temperature of steam(130~150C) which is not proper for the car washing. |
|
Owing to our patented momentary exposure system, different from existing other machines, steam can be sprayed
in 5minutes. In existing boiler system, it would take 15 minutes at least to spray steam. |
|
User can operate the machine with button only and labour can be reduced with two nozzles. |
|
As well as car washing, wax can be poured and sprayed for dual effect of car washing and polishing. |
|
Upgraded full automatic car washer which can control temperature, pressure, water and gas supply by our patented
technology. |
|
Safety would be double secured by breaker of alarm for over-heating or lack of water and by safety valve for
over-pressure. |
|
Light weight and proper size are suitable to install at existing washing center, self washing center, car center and any
other place for car washing. |
|
SMCW SERIES could clean the engine room, car deck, door trim, windshields and seat as well as car surface. |
|
SMCW SERIES are eco-friendly car washer preserving water resources without wasting water. User does not need
to install sewage disposal facilities. |
|
|
|
|
|
 |
|
Model |
SMC-25 |
SMCW-E15 |
SMCW-030 |
Power |
ElECTRIC
Control(220V, 50/60Hz)
Heater ( 220V) |
ElECTRIC
Control(220V, 50/60Hz)
Heater (3 380V) |
ElECTRIC
Control(220V, 50/60Hz)
Burner (220V, 50/60Hz) |
Measurement (§®) |
300X375X350 |
480X900X830 |
690X1040X1400 |
weight (§¸) |
13 |
90 |
150 |
Capa.of Water Tank (§¤) |
N/A |
7.8 |
13 |
Hose Length (m) |
Ortional |
10 |
10 |
Fuel |
Electric |
Electric |
Oil/Gas |
Power Consumption (§Ò/hr) |
2.5 |
15 |
2.6(§¤/hr) |
Working PRESSURE (§¸/hr) |
3 |
5~6 |
5~6 |
Steam Temp |
60~70¢ª |
80~90¢ª |
80~90¢ª |
Water Consumption
(§¢/min) |
20~25 |
300~350 |
450~500 |
|
* Specifications can be changed without pre-notice according to technical development or change of design condition. |
|
|
|
|